CLOSE

4Cr5MoSiV1 Steel


As H13 air-quench-hardening hot work die steel imported from the United States, 4Cr5MoSiV1 is representative steel grade with a wide range of uses in hot work die steel. Its properties and uses are basically the same as that of 4Cr5MoSiV steel. The applied standard is GB/T1299-2000.



Chemical properties of 4Cr5MoSiV1 Steel

Steel Grade

C

Si

Mn

P

S

Cr

Ni*

Cu*

Mo

V

4Cr5MoSiV1

0.32-0.45

0.80-1.20

0.20-0.50

≤0.030

≤0.030

4.75-5.50

≤0.25

≤0.30

1.10-1.75

0.80-1.20

*  residual content allowed



Application of 4Cr5MoSiV1 Steel

  • suitable for making aluminum alloy die-casting molds, as well as tools and mandrels used in hot extrusion and perforation, hammer forging dies, press forging dies, high-speed precision forging dies and plastic press dies, etc.



Features of 4Cr5MoSiV1 Steel

  • The steel can withstand great thermal stress caused by repeated heating and cooling, without cracks in the surface layer。

  • The steel can withstand huge mechanical stress, as well as the impact and erosion of liquid metal flow.

  • Because of higher vanadium content, the steel’s strength, toughness and thermal fatigue resistance and wear resistance in medium temperature (600 degrees) are better than that of 4Cr5MoSiV steel. Meanwhile, it has a small oxidation tendency and thermal deformation after air quenching.



More Article

Info Center Products
Contact Us

Focus on manufacturing special steel cast and forged
components for more than 25 years.

Contact Us